Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
Key and supplementary comparisons - Results
CCM.F-K2.b
Information
Pilot / Contact
Participants
Results
    · Force 50 kN
Print out
Related links
KCDB Statistics
KCDB FAQs
KCDB Reports
CIPM MRA
JCRB
Find my NMI
Metrologia
Contact us
BIPM.KCDB@bipm.org
CCM.F-K2.b
Results
Laboratory individual
measurements

Equivalence
statements

Degrees
of equivalence

Graph(s)
of equivalence

CCM.F-K2.a, CCM.F-K2.b, CCM.F-K2.a.1, EUROMET.M.F-K2, APMP.M.F-K2.a and APMP.M.F-K2.b

  • Key comparisons CCM.F-K2.a and CCM.F-K2.b

MEASURAND : Force
NOMINAL VALUE : 50 kN

Measurements in key comparisons CCM.F-K2.a and CCM.F-K2.b correspond to the schemes A and B respectively, as explained on page 4 of the Final Report. Two transducers are used in scheme A, and three transducers are used in scheme B:
- in scheme A, the two transducers have a nominal capacity of 100 kN and are used to measure 50 kN and 100 kN forces;
- in scheme B, two transducers have a nominal capacity of 50 kN and are used to measure 50 kN forces, and one transducer has a nominal capacity of 100 kN and is used to measure 50 kN forces.

Detailed results of measurements obtained in both key comparisons are given in Section 9 on page 18 of the Final Report. They are then concatenated (see page 30 of the Final Report) in order to provide one set of measurements for 50 kN forces and one set of measurements for 100 kN forces. These two sets of results are shown in Figure 26 and Figure 27 on page 31 of the Final Report.

Date of measurements: 2004 - 2007

  • Key comparison CCM.F-K2.a.1

MEASURAND : Force
NOMINAL VALUE : 50 kN

Measurements in key comparisons CCM.F-K2.a.1 were made in scheme A. Detailed description of the measurement results is given in Sections 8 and 9 of the CCM.F-K2.a.1 Final Report.

Date of measurements: 2010 - 2011

  • Key comparison EUROMET.M.F-K2

MEASURAND : Force
NOMINAL VALUE : 50 kN

The same scheme is followed for the measurements in key comparison EUROMET.M.F-K2, as explained on page 4 of the EUROMET.M.F-K2 Final Report.
Results obtained by participating laboratories are given in Section 9 (starting on page 14) of the Final Report. The two sets of results (for 50 kN and 100 kN) are shown on Figures 18 and 19 on page 24 of the Final Report.

Date of measurements: 2007 - 2009

 

  • Key comparisons APMP.M.F-K2.a and APMP.M.F-K2.b

MEASURAND : Force
NOMINAL VALUE : 50 kN

The same scheme as in CCM.F-K2.a and b is followed for the measurements in key comparisons APMP.M.F-K2.a and APMP.M.F-K2.b. The results are given in Section 6 of the Final Report.

Date of measurements: 2007 - 2014